Digitmap not applying?

Hi all,

VVX500 phone, 5.9.6.2327 software.

Dialing off-hook.

In the web interface, I set digimap to nothing and apply it via config file.

Well, digitmap does not work at all. If I am to copy it and place into web interface, it is functioning as expected. So, digitmap itself is OK, looks like phone is ignoring it.

Here is what I see on the right hand site of the configuration screen.

• • Digitmap
    (dialplan.digitmap)
  • All digits that you enter on the phone will be compared with the digitmap specified for this setting. If the digits match a digitmap pattern, the call will be automatically placed, without the Send key being pressed. The digitmap can specify one or more patterns.
• Configured Source Values
  • The parameter values from different sources are listed here. If a parameter value is configured from multiple sources, the phone will use the value from the highest-priority source.
  • Local:Not Applicable
  • Web:Not Applicable
  • Config:0,000|1xx|0,[589]xxxxxxx|0,0xxxxxxxxx|0,1800xxxxxx
  • TR-069:Not Applicable
  • SIP:Not Applicable

Another thing I noticed -- when I apply digitmap via web interface, information in web interface does not change -- it still shows "Web: Not Applicable". I attached screenshot from web interface. note that digitmap is set, but information on the right shows as "Not Applicable";

Thanks,

Rudolf