Hello everyone.
I recently bought a used Soundstation IP 6000. The unit I received says it is Part Number 3111-15600-001 Rev:R in the web GUI.
This particular unit won't boot at all unless I use the power adapter cable and the injector. The port it is connected to is 100% PoE and it previously had an Avaya phone plugged into it. I checked all the obvious things to rule out a network issue (changed cables, plugged in the SSIP to another port on the switch, reset PoE on the port, etc), but this phone steadfastly refuses to power on with PoE. It will only power on with the adapter.
- Is this normal?
- On the internet, I found that some SSIP 6000's were sold as "AC Power version". Was that a normal PoE phone with an injector, or was it a completely different phone that only works when plugged in?
I also have another SSIP 6000, part number "3111-15600-001 Rev:N", which powers up absolutely fine using PoE.